STEMEX Windmill Studio
STEMEX

Windmill Studio

Style
Level

Drag to look around
Show me:

Sails

Design and test

Design your own mill

Change one thing at a time. Predict, test, then record what happened.

Your design

Number of sails
10.0 m

Overall gear change: ร— 6.0

Results right now

Sails0 rpm
Millstone0 rpm
Useful power0 kW
Millstone checkNot turning

Millstones grind best between about 100 and 150 rpm. Below 60 rpm they hardly grind. Above 200 rpm the flour gets hot.

Design challenge A

Make the millstone turn between 140 and 170 rpm in an 8 m/s wind.

Not yet

Design challenge B

Make at least 24 kW of useful power in an 8 m/s wind, with the millstone between 100 and 150 rpm.

Not yet

Predict, test, record

Before your next test, what do you think will happen to the useful power?

TestWind m/sSailsLength mGearsUseful kWMillstone rpmEfficiencyPredictedResult
No tests yet. Set up your mill, then press Record this test.

Today

What you will learn

    Energy

    Follow the energy

    These numbers change as you move the controls above.

    Gears

    Why the millstone spins faster than the sails

    The sails turn slowly but with a big turning force. Millstones need to spin much faster to grind well, so the mill uses two pairs of gears to speed things up.

    When a big gear drives a small gear, the small gear has to turn more times to keep up. Count the teeth to find out how many more.

    The rule

    speed change = teeth on driver รท teeth on driven

    Tick Look inside and watch the gears. The table uses the gears from your design.

    DriverDrivenSumChange

    Investigate

    Try it yourself

    Work in pairs. Use the model to find the answer, then check.

    Challenge 1

    Set the wind to 5 m/s and write down the useful power. Now double the wind to 10 m/s. How many times bigger is the power?

    Show answer

    About 8 times bigger, not 2. The power in the wind depends on the wind speed cubed: 2 ร— 2 ร— 2 = 8. A little more wind makes a lot more power.

    Challenge 2

    Untick Fantail working. Now swing the wind direction round to come from the north. What happens to the sails, and why?

    Show answer

    The sails slow down and stop. The wind now hits them from the side, so it cannot push them round. Press Turn cap by hand to see how much slower life was before the fantail was invented in 1745.

    Challenge 3

    Set the wind to 12 m/s. Close the shutters fully, then open them fully. What changes, and why would a miller do this?

    Show answer

    Open shutters let air pass straight through, so the force on the sails is smaller and they turn more slowly. Millers opened the shutters in strong winds so the sails did not spin dangerously fast.

    Challenge 4, stretch

    In the standard mill the sails turn 10 times. How many times does the wallower turn? How many times does the millstone turn?

    Show answer

    The wallower turns 20 times (10 ร— 2). The millstone turns 60 times (10 ร— 6).

    KS3 stretch: the power formula

    The power in the wind passing through the sails is

    P = ยฝ ร— ฯ ร— A ร— vยณ

    ฯ (rho) is the density of air, 1.225 kg/mยณ. A is the area the sails sweep, ฯ€ ร— lengthยฒ. v is the wind speed in m/s.

    Old windmill sails capture only about 16% of this. Modern wind turbines capture up to about 50%. No wind machine can ever capture more than 59%, because some air must keep moving to get out of the way. This is called the Betz limit.

    Then and now

    Windmills and wind turbines

    Look out to sea from Great Yarmouth and you can see Scroby Sands, one of the first offshore wind farms in the UK. Same wind, very different machine.

    FeatureNorfolk tower millModern wind turbine
    JobGrinding grain into flour, or pumping water off the marshesGenerating electricity
    Catches the wind with4 sails with shutters3 long, thin blades shaped like aircraft wings
    Sizeabout 20 m acrossover 150 m across at sea
    Faces the wind usingThe fantailA wind sensor and electric motors
    Controls speed byThe miller opening the shuttersA computer twisting the blades
    Captures about16%45 to 50%

    From wheat to bread

    Tap the pictures in order. What happens first?

    Which picture comes first?

    Check

    Quiz time

    Your stars:

    Make your own windmill

    A paper windmill spins just like the one above. Ask a grown-up to help.

    For grown-ups: scissors and split pins are only for adults. Split pins are small parts. For Level 1, make the windmill before the session.

    1. Get a square of paper.Bright colours look great when they spin.
    2. Draw two lines from corner to corner.They make a big X.
    3. Cut along each line.Grown-up job: stop before the middle.
    4. Fold every other corner into the middle.You fold 4 corners.
    5. Fix it to a paper straw.Grown-up job: push a split pin through the middle and the straw.
    6. Blow and watch it spin.Blow gently, then hard. Which is faster?

    Finish

    My win today

    I can

    What did you like best?

    My stickers

    Show your tutor your stickers.

    Key words

    More words

    For parents, carers and schools

    About Windmill Studio

    What it is

    A STEMEX learning page about how windmills turn wind into useful work. Children choose a style and a level, explore a 3D Norfolk tower mill and complete short activities with a tutor or family member.

    Curriculum links

    Accessibility

    Everything can be read aloud, with captions. Calm mode lowers colour, sound and motion. Large buttons, readable fonts, dark mode, keyboard use and lighter graphics for older devices.

    Privacy and safety

    No personal data is collected. No accounts, chat, adverts or links to other websites. The style and level choice is remembered on this device only. If you turn on the microphone, it only measures loudness. Nothing is recorded or sent.

    Contact STEMEX

    www.stemex.uk
    info@stemex.uk
    01603 364823
    Unit 54-55 Castle Quarter, Norwich NR1 3DD

    Notes for STEMEX staff